Wrought iron sample bundles

We now offer sample bundles of our genuine wrought iron so you can see for yourself the properties of this wonderful material. The bundles weigh 10kg and contain a selection of round, square and flat sections, in lengths ranging from 1 foot to 2 foot. These sample bundles cost £40 (sterling) plus VAT and carriage.

Please email us if you wish to purchase one of these sample bundles.

PLEASE NOTE THAT THESE ARE TEMPORARILY OUT OF STOCK.

Our Sample bundles are made from the off-cuts from our rolling mill so the section sizes vary from month to month but typically range from 1/2″ square to 1″ square and from 3/4″ x 3/8″ flat section up to 2″ x 1/2″ flat section. Round sections tend to range from 1/2″ diameter up to 1″ diameter. We cant produce specific tailored bundles , however if you are making pattern welded material and would prefer just flat sections please mention this in your email request and we can usually accommodate this.

You might also be interested in

The Latest News

Craftsmanship brought home.

Topp & Co. has for decades been established as a leading design and metalwork company, creating bespoke architectural metalwork for prestigious and challenging projects. Opulental is a sister company of Topp & Co. and was created by Jerome Peycher the […]

The Waldorf Hilton, Aldwych, London.

We were commissioned by Stone Edge Conservation to repair and restore the decorative wrought iron balustrading mounted on two floors across the entire facade of the building. Including the replacement of a large proportion of the wrought iron rails, the […]